Banner

Products

Home Medical Gas Supply & Monitoring

Adsorption dryer ATM

Adsorption dryer ATM
Adsorption dryer ATM
Adsorption dryer ATM

Adsorption dryer ATM

The Adsorption dryer ATM dries and purifies the compressed air supplied by the compressor and provides medical breathing air.

The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.

  • Type :

    ATM

Before the compressed air is fed into the dryer, it flows through upstream filters where dust, dirt, oil and water droplets are removed. Thus, the installed upstream filter is also used for extending the service life of the drying agent. The installed downstream filters clean the compressed air from drying agent abrasions, before it is fed into the compressed air system.

 

The two vessels contain an extremely porous drying agent by means of which humidity is removed from the compressed air and stored just as in a sponge. The stored humidity is then removed again from the drying agent and re-introduced into the ambient environment.

To this end, the two vessels alternate between different operating modes. Whilst in one vessel, compressed air is de-humidified (adsorption), in the other vessel the humid drying agent is prepared for another charge (regeneration).

 

These two states, which run in parallel during compressed air preparation.

 

Product Advantages:

  • for the preparation of compressed air. European standard compliance
  • with load dependent controls, including dew point measurement (optional)
  • Compressed air 5-stage filtration
  • 2 adsorption batteries for air drying

 

Specification:

Type

Capacity m3/h

Dimensions

Weight

Connection

 

 

B       T      H

 

 

ATM 15

180

1100   664  1106

191

1”

ATM 18

216

1100   664  1266

212

1”

ATM 22

252

1154   664  1382

222

1”

ATM 34

408

1154   729  1652

301

1 1/2”

ATM 45

576

1527   729  2011

337

1 1/2”

ATM 55

720

1980   875  1800 

417

1 1/2”

 

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

Related Products

Medical Gas Outlets
Medical Gas Outlets

The HEYER Medical Gas Outlets are used in gas supply plants for medical premises in accordance with DIN EN ISO 7396-1. The connector is supplied in different versions and installation variants. The installation in solid walls, lightweight walls, ceiling supply units, this allows bed rails, intensive care units, etc. In principle, HEYER medical gas connectors can be plugged into all Deck supply units, energy supply units and gas boxes of all kinds Manufacturers and variants are installed.

Medical anesthesia exhaust outlets
Medical anesthesia exhaust outlets

The HEYER AGSS anesthesia gas recovery and discharge system can prevent users or staff from inhaling the anesthetic exhaust gas left by the operating room gas circulation system, ensuring the safe use of anesthesia gas in hospitals. Jet anesthesia exhaust gas discharge system is an independent discharge system, will not be interfered by other operating rooms or systems, compared with the first generation of negative pressure discharge system, technically safer and more stable; Lower cost in terms of construction; Can be used intermittently, more convenient.

Medical gas source switching device
Medical gas source switching device AGS

The HEYER switching device (model: AGS 35-50 \ AGS 80) is a system that can automatically switch between two sets of gas cylinders through an adjustable switching valve. This process is carried out under the control of a switching valve, which automatically and accurately switches based on the difference in the preset pressure range.

Medical pressure Control panels
Medical pressure Control panels

The HEYER two-stage pressure regulator system is used for the central station air compressor unit, liquid oxygen storage tank and each ward in the complex building. The secondary pressure regulator system can adjust the pressure in the pipeline to meet the different needs of the hospital.

Medical Control & valve alarm device
Medical Control & valve alarm device

For operational safety and better monitoring, the pipeline of the central oxygen supply system is usually divided into multiple areas.   When dealing with faults and detections in the central oxygen supply system, we suggest that each ward be managed independently. The area cut-off alarm box is equipped with an emergency shut-off device for the air circuit, while also ensuring the reliable operation of other normal systems.

Adsorption dryer ATM
Adsorption dryer ATM

The Adsorption dryer ATM dries and purifies the compressed air supplied by the compressor and provides medical breathing air. The air is thereby dried alternately in one of the drying agent vessels. The dried air is subsequently purified in the third vessel, whereby oil residue and other contaminants are removed.

Mobile oxygen supply system for ambulances
Mobile oxygen supply system for ambulances

Ambulance is an indispensable part of the modern emergency medical service system, is the activity place for medical personnel to rescue critically ill patients before hospital and on the spot, is an important part of modern emergency medicine, especially in response to public health emergencies, saving patients' lives play a key role. negative pressure ambulance, can achieve in-car first aid.

leave a message

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
submit

home

products

WhatsApp

Contact