Search
What Are You Looking For?
Search
S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting, use as Industry Gas Analyzer. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
Type :
SA-200Industry Gas Analyzer Application:
Product Advantages:
Specification:
|
Product Type |
S-ANALYZER 200 V5.0 |
|
Channel
|
- Max. 5 measured Gases - Configuration information includes - measuring gas type - measurement range - measuring Error |
|
Response time |
General：<25s (t90 @60 L/h Constant Flow) |
|
Warm up Time |
3min~30minn @amibent 20℃ (accord different detector configuration) |
|
Digital Res. (@zero |
General： - 0.01Vol.% in case of percent range (e.g. 0.001Vol.% for BMBT O2 channel) - 0.1 µmol/mol in case of µmol/mol range |
|
Operation Handling |
Touch panel, 5.6” TFT |
|
Analog Output |
4mA~20mA (normal operation) 2mA (in warm-up or status alarm) |
|
Analog Output Range |
Default is 4mA for lower range, and 20mA for upper range. User setable. |
|
Relay contact output |
Relay out quantity: x6 With relay out assignment for: 1. x1 instrument error alarm 2. x1 sample gas control valve relay signal for auto. cali. 3. x1 auto. cali. zero gas supply control valve relay signal 4. xN (N is channel quantity) auto. cali. span gas supply control valve relay signal 5. xN (N is channel quantity) gas concentration upper/lower alarm |
|
Relay Property |
1A contact (250V AC/2A, resistive load) |
|
Communication |
Standard RS232 (DB-9 female) RS485 with modbus protocol. |
|
Operating Voltage |
98~242V AC, 50/60 Hz. Power consumption <125W |
|
Power inlet |
EN60320 C1 |
|
Fuse |
Fuse Current: 3A ,Blow Characteristic: Fast Acting Fuse Size Metric: 5mm x 20mm |
|
Case Protection Level |
IP41 (EN60529) |
|
Weight |
typical approx. 10kg (w/o package) approx. 19kg (w/ package) |
|
Gas Inlet Flow |
0.4~0.8 L/min (Flow fluctuations ≤0.02 L/min) |
|
Inlet Gas Temp. |
5~35 ℃ |
|
Inlet Gas Pressure |
116kPa (max) |
|
Moisture in Gas |
• not condensing • inlet gas dew point：5℃±0.1℃ (This item is required when measure channel include NDIR SO2 and/or NO) |
|
Dust in gas flow |
100µg/m³, ≤1µm |
|
Zero calibration gas |
99.999Vol.% N2 (typical) |
|
3th point(middle point) calibration gas range |
Allow range: 0.375*FS~0.625*FS
|
|
Span calibration gas range (user calibration) |
Allow range: 0.75*FS~1.25*FS
|
S-ANALYZER 200 series is a multi-gas analyzer for 19"rack-mounting, use as Industry Gas Analyzer. Up to 5 components can be measured and the measuring principles may be ordered in various combinations. S-ANALYZER 200 is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
S-ANALYZER 200 NDUV series use NDUV gas measurement technology, is a multi-gas analyzer for 19"rack-mounting with integrated NDUV Gas sensor, up to 5 components can be measured. S-ANALYZER 200 NDUV is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
S-ANALYZER 200 ATEX is an industrial explosion-proof multi-component Industry ATEX Gas analyzer that can simultaneously detect up to five components of gases. Explosion-proof class ExdIICT6 Gb. The analyzer is equipped with display screen and explosion-proof button to display the detection concentration in real time, which is suitable for the detection of gas concentration in various industrial occasions.
SPTr-GAS® ANALYZER use Photo-acoustic trace gas measurement technology, is equipped with a 5.6'’ touchscreen, in combination with a well-arranged menu structure, intuitive and user-friendly operation are assured. All necessary status. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered. Photoacoustic technology is an innovative spectrum analysis method, which is different to traditional infra-red technology. This method transfers effective spectrum into acoustic signal, and assemble this acoustic signal through high sensitive microphone, with this signal the gas concentration will be calculated.
SPTr-GAS® PORT 200 is high end Portable Photoacoustic Gas ANALYZER, which is small, light, easy to carry for end user. All limit value / alarm value can be adjusted by user. The screen can shows also measurement value . The calibration of zero or span will achieved automatically. SPTr-GAS® PORT 200 shows good accuracy and stability, it fulfill many kinds of trace gas measurement application.
S-ANALYZER 200 BMBT series is Paramagnetic oxygen gas measurement device, a multi-gas analyzer for 19"rack-mounting, configured with two gas streams, two gas inlets and two gas outlets. S-ANALYZER 200 BMBT is equipped with a touchscreen. In combination with a well-arranged menu structure, intuitive and user-friendly operations is assured. All necessary status-, threshold-, and alarm messages for effective monitoring are provided as analogue and digital signals. Graphic display of measurement curves are also as option offered.
SPGAS® PORT 110 is SIGAS comprehensive portable analzyer type, this Potable gas analyzer with NDIR gas sensor which can equipped with all kind of gas sensors according to customer requirement with alarm output and real time concentration display. Used for industry routing inspection, toxic gas measurement and so on.
SPGAS® PORT mini is SIGAS comprehensive portable analzyer type, which can equipped with all kind of gas sensors according to customer requirement with alarm output and real time concentration display. The device is small and convenient, can be used for industry routing inspection, toxic gas measurement and so on.
SIGAS offer panel oxygen gas Analyzer SA-TR96 , which can measure O2 with electrical chemical and ion flow oxygen sensor technology. SIGAS analyzer can also use different technology to fulfill all kind of application requirement.
SA-200-EC analyzer is an oxygen analyzer that is based on microprocessor and adopts fuel cell oxygen sensor as the detection unit, the digital processing techniques are adopted in this analyzer. It can monitor its self work state momentarily as it has completely self-detection function. It has characteristics as intelligence, good stability, quick response, long service life and so on. This analyzer is suitable for accurate measurement oxygen concentration in gas mixture in various industries and various environments.
S-Handheld 10 is used to quickly and accurately detect the concentration of multiple gases, and will alarm if the measurement exceeds the limit. Using 4.3-inch HD color screen real-time display, using the international famous brand of gas sensor, the main detection principles are: electrochemical, infrared, catalytic combustion, thermal conductivity, PID photoion, etc.
High-precision handheld Raman spectrometer S-RAS Handheld using Raman spectroscopy technology, combined with intelligent algorithm and rich spectrum library, can quickly identify all kinds of drugs and precursor chemicals, explosives, chemical warfare agents, dangerous chemicals and other substances in the field.
SPGAS® PORT 600/700 is SIGAS electrochemical oxygen portable analyzer type, which can equipped with high quality EC gas sensors according to customer requirement with alarm output and real time concentration display. Used for industry routing inspection, toxic gas measurement and so on.
IPv6 network supported
